Sulfur Monochloride

Home Forums Tryptamines Sulfur Monochloride

This topic contains 1 reply, has 0 voices, and was last updated by  Jennifer 22nd March 2018 at 6:02 am.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #2829

    Jennifer
    Participant

    General Description:

    Synonyms: Sulfur chloride; Sulfur subchloride

    OSHA IMIS Code Number: 2320

    Chemical Abstracts Service (CAS) Registry Number: 10025-67-9

    NIOSH Registry of Toxic Effects of Chemical Substances (RTECS) Identification Number: WS4300000

    Department of Transportation Regulation Number (49 CFR 172.101) and Guide: 1828 137

    Chemical Description and Physical Properties:

    amber to red, fuming, oily liquid with a pungent, nauseating, irritating odor
    molecular weight: 135
    vapor pressure: 6.8 mm
    boiling point: 280°F
    melting point: -105°F
    Incompatibilities: Peroxides, oxides of phosphorous, organics; water

    Exposure Limits
    OSHA Permissible Exposure Limit (PEL):

    General Industry: 1 ppm, 6 mg/m3

    Construction Industry: 1 ppm, 6 mg/m3 Ceiling
    American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV): 1 ppm, 5.5 mg/m3 Ceiling

    National Institute for Occupational Safety and Health (NIOSH) Recommended Exposure Limit (REL): 1 ppm Ceiling

    Health Factors
    Potential Symptoms: Lacrimation; coughing; eye, skin burns; pulmonary edema

    Health Effects: Irritation-Eye, Nose, Throat, Skin—Marked (HE14)

    Affected Organs: Respiratory system, skin, eyes

    Monitoring Methods used by OSHA
    Primary Laboratory Sampling/Analytical Method (SLC1):

    sampling media: Midget Fritted Glass Bubbler (MFGB) containing 10 mL Deionized Water
    maximum volume: 30 Liters
    maximum flow rate: 1.0 L/min (TWA)
    minimum time: 5 Minutes
    maximum flow rate: 1.0 L/min (Ceiling)
    current analytical method: Ion Chromatography; IC
    method reference: 2 (OSHA In-house file)
    method classification: Not Validated
    note: Submit as separate sample. An analysis is performed for total Cl- and reported as the compound.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.